ARCserve-Alarm-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1065-SMI OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215; cheyenne OBJECT IDENTIFIER ::= { enterprises 46 } arcServe OBJECT IDENTIFIER ::= { cheyenne 877 } arcServeRev OBJECT IDENTIFIER ::= { arcServe 1 } -- ************************************************************************* -- ARCserve (1.3.6.1.4.1.46.877) -- ************************************************************************** arcServeevMajor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The major revision level of ARCserve (left of the decimal). Used for presence checking." ::= { arcServeRev 1 } arcServeRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The minor revision level of ARCserve (right of the decimal)." ::= { arcServeRev 2 } arcServeParmsTrapEnable OBJECT-TYPE SYNTAX INTEGER (0..1) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether agent should or should not send traps." ::= { arcServe 2 } arcServeParmsPollTime OBJECT-TYPE SYNTAX INTEGER (60..2592000) ACCESS read-write STATUS mandatory DESCRIPTION "Seconds between checking for traps." ::= { arcServe 3 } arcServeServerName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "ARCserve server which generated trap." ::= {arcServe 4} arcServetrapdesc OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "A description of a specific Cheyenne trap" ::= {arcServe 5} -- ************************************************************************* -- traps -- ************************************************************************** arcServetrapHigh TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "ARCserve Critical Trap A Critical trap has been generated by ARCserve. Refer to the trap summary information for a detailed description of this trap. A critical trap normally indicates a serious error has occurred." --#TYPE "ARCserve Critical" --#SUMMARY "%s %s " --#ARGUMENTS {0,1} --#SEVERITY CRITICAL --#STATE DEGRADED ::= 1 arcServetrapMed TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "ARCserve Minor Trap A minor trap has been generated by ARCserve. Minor traps are used by ARCserve to warn the user of unusual, but not fatal incidents. Review the message summary to determine if this trap should concern you." --#TYPE "ARCserve Warning" --#SUMMARY "%s %s " --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 2 arcServetrapLow TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "ARCserve Informational Trap An ARCserve informational trap has been generated by ARCserve." --#TYPE "ARCserve Informational" --#SUMMARY "%s %s " --#ARGUMENTS {0,1} --#SEVERITY INFORMATIONAL --#STATE OPERATIONAL ::= 3 arcServetrap4 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Failed to locate job list service. This trap signifies that ARCserve was unable to locate it's NetWare queue or Windows NT/UNIX Job list. This problem can be caused in NetWare by Bindery or Directory Services corruption or by the deletion of the ARCserve queue." --#TYPE "Failed to locate job list service." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 4 arcServetrap5 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Failed to retrieve job from Job List Service. This trap signifies that ARCserve cannot process jobs. Under NetWare, this is normally due to a Bindery or Directory Services corruption. Please verify that ARCserve was completely installed and that your Bindery/Directory is not corrupted." --#TYPE "Failed to retrieve job from Job List Service." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 5 arcServetrap6 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Failed to allocate memory. This trap signifies that ARCserve was unable to allocate memory. More server memory may be required if this message occurs on a regular basis. This message is not normally fatal, unless repeated attempts for memory fail." --#TYPE "Failed to allocate memory." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 7 arcServetrap7 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Server is low on memory, cannot start jobs. This trap signifies that server is so low on memory that jobs cannot be processed. Shutdown any unnecessary modules to obtain additional memory so that jobs can be processed. Jobs will be processed when sufficeint memory has been restored on the server." --#TYPE "Server is low on memory, cannot start jobs." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 8 arcServetrap8 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Same license found on another server. This trap signifies that another server has the same license as the server which generated the server. You must install different licenses on each ARCserve server." --#TYPE "Same license found on another server." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 9 arcServetrap9 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Failed to format tape. This trap signifies that ARCserve was unable to format a tape. This could be caused by hardware or media failure. Verify tape drive has been cleaned and all cable connections. This message can also occur when an invalid board driver has been loaded." --#TYPE "Failed to format tape." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 9 arcServetrap10 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Failed to read tape header. This trap signifies a hardware or device failure when trying to read the tape header. Verify that the tape is an ARCserve formatted tape. Also verify that the tape drive has been cleaned and all cables are properly connected. This message can also be displayed when an invalid board driver has been loaded." --#TYPE "Failed to read tape header." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 10 arcServetrap11 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Failed to access tape. This trap signifies that ARCserve was unable to access the the tape. Also verify that the tape drive has been cleaned and all cables are properly connected. This message can also be displayed when an invalid board driver has been loaded." --#TYPE "Failed to access tape." --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 11 arcServetrap12 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Backup Operation Cancelled. This trap indicates that the backup job has been cancelled. This is normally due to an operator cancelling/deleting a job from the ARCserve job list." --#TYPE "Backup Operation Cancelled" --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 12 arcServetrap13 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Backup Operation Successful This trap signifies that the backup operation completed successfully." --#TYPE "Backup Operation Successful" --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY INFORMATIONAL --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 13 arcServetrap14 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Backup Operation Incomplete This trap signifies that the backup operation completed with warnings. Refer to the activity log to determine if important nodes selected for backup have been missed." --#TYPE "Backup Operation Incomplete" --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY MINOR --#TIMEINDEX 1 --#STATE OPERATIONAL ::= 14 arcServetrap15 TRAP-TYPE ENTERPRISE arcServe VARIABLES { arcServeServerName, arcServetrapdesc } DESCRIPTION "Backup Operation Failed This trap signifies that backup operation failed. This message indicates that the backup encountered serious processing errors. Refer to the activity log for a description of the problems en- countered which caused the backup failed." --#TYPE "Backup Operation Failed" --#SUMMARY "%s %s" --#ARGUMENTS {0,1} --#SEVERITY CRITICAL --#TIMEINDEX 1 --#STATE DEGRADED ::= 15 END