-- MIB file created 27-Oct-2009 14:02:56, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-CABLE-L2VPN-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-CABLE-L2VPN-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    MacAddress
            FROM SNMPv2-TC-v1
    InetAddressType, InetAddress
            FROM INET-ADDRESS-MIB
    CpwVcIDType, CpwVcType
            FROM CISCO-IETF-PW-TC-MIB
    ciscoMgmt
            FROM CISCO-SMI
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

ciscoCableL2vpnMIB OBJECT IDENTIFIER ::= { ciscoMgmt 700 }
-- MODULE-IDENTITY
--  LastUpdated
--    200906170000Z
--  OrgName
--    Cisco Systems, Inc.
--  ContactInfo
--    Cisco Systems 
--    Customer Service 
--    Postal: 170 W Tasman Drive 
--    San Jose, CA 95134 
--    USA 
--    
--    Tel: +1 800 553-NETS 
--    E-mail: cs-ubr@cisco.com
--  Descr
--    This MIB module defines managed objects that facilitate 
--    the management of Cisco devices complying to the DOCSIS 
--    L2VPN Feature for IP/MPLS pseudo-wire. The Cisco CMTS 
--    implementation of IP/MPLS pseudo-wire is based on DOCSIS 
--    BSOD L2VPN specification. 
--    
--    The information available through this MIB includes: 
--    Mapping information between various configuration of the 
--    pseudo-wire pertaining to DOCSIS BSOD L2VPN. The MIB 
--    tables implemented give quick access to information using 
--    either Cable Modem MAC address/VPN, peer IP address/VCID 
--    or L2vpnIndex as index in tables. 
--    
--    Glossary: 
--    
--    CMTS   - Cable Modem Termination System 
--    VCID   - Virtual Circuit Identifier 
--    MPLS   - Multi-Protocol Label Switching 
--    AToM   - Any Transport Over MPLS 
--    DOCSIS - Data over Cable Service Interface Specification 
--    BSOD   - Business Services over DOCSIS 
--    L2VPN  - Layer 2 Virtual Private Network 
--    pseudo-wire - Layer 2 connection over IP/MPLS backbone
--  RevDate
--    200906170000Z
--  RevDescr
--    Initial version of this MIB module.

ciscoCableL2vpnMIBNotifs OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIB 0 }
ciscoCableL2vpnMIBObjects OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIB 1 }
ciscoCableL2vpnMIBConform OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIB 2 }
ccl2vpnMIBCompliances OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIBConform 1 }
ccl2vpnMIBGroups OBJECT IDENTIFIER ::= { ciscoCableL2vpnMIBConform 2 }

CiscoCableL2vpnIndex ::= Gauge(1..4294967295)
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    An integer value locally generated by the CMTS for each 
--    known pseudo-wire. It is intended to be used as a short 
--    index for tables in this MIB module. This index is allocated 
--    at runtime from a pool of indices for each pseudo-wire and 
--    is unique to that pseudo-wire only between every creation 
--    and deletion of that pseudo-wire.

ccl2vpnMacVpnIdL2vpnIndexTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ccl2vpnMacVpnIdL2vpnIndexEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Every L2VPN provisioned Cable Modem can be a part of 
        multiple VPNs and the CMTS assigns a L2vpnIndex for 
        each {Cable Modem MAC address, VPN-id} pair. This table 
        maps {Cable Modem MAC address, VPN-id} to the L2vpnIndex."
    ::= { ciscoCableL2vpnMIBObjects 1 }

ccl2vpnMacVpnIdL2vpnIndexEntry OBJECT-TYPE
    SYNTAX Ccl2vpnMacVpnIdL2vpnIndexEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each row contains the Cable Modem MAC address and VPN 
        identifier and the corresponding L2vpnIndex. Entry in  
        this table is populated for each one of the pseudo-wire 
        provisioned on the CMTS."
    INDEX { ccl2vpnMac, --?? IMPLIED may cause problems
            IMPLIED ccl2vpnVpnId }
    ::= { ccl2vpnMacVpnIdL2vpnIndexTable 1 }

Ccl2vpnMacVpnIdL2vpnIndexEntry ::= SEQUENCE {
    ccl2vpnMac MacAddress,
    ccl2vpnVpnId OCTET STRING,
    ccl2vpnMacVpnIdToL2vpnIndex CiscoCableL2vpnIndex
    }

ccl2vpnMac OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the Cable Modem MAC address."
    ::= { ccl2vpnMacVpnIdL2vpnIndexEntry 1 }

ccl2vpnVpnId OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..16))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the VPN provisioned for L2VPN 
        Cable Modem."
    ::= { ccl2vpnMacVpnIdL2vpnIndexEntry 2 }

ccl2vpnMacVpnIdToL2vpnIndex OBJECT-TYPE
    SYNTAX CiscoCableL2vpnIndex
--    Rsyntax Gauge(1..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the L2vpnIndex assigned for this Cable 
        Modem MAC Address/VPN pair by the CMTS."
    ::= { ccl2vpnMacVpnIdL2vpnIndexEntry 3 }

ccl2vpnPWL2vpnIndexTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ccl2vpnPWL2vpnIndexEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Every L2VPN Cable Modem can be provisioned with multiple 
        VPNs and for each {Cable Modem MAC address, VPN-id} pair, 
        there is a IP/MPLS pseudo-wire established. The pseudo-wire 
        is specified by {peer IP address, VCID}. This table maps 
        {peer IP address, VCID} to the L2vpnIndex."
    ::= { ciscoCableL2vpnMIBObjects 2 }

ccl2vpnPWL2vpnIndexEntry OBJECT-TYPE
    SYNTAX Ccl2vpnPWL2vpnIndexEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each row contains the pseudo-wire peer IP address and 
        Virtual Circuit Identifier (VCID) and the corresponding 
        L2vpnIndex. Entry in this table is populated for each one 
        of the pseudo-wire provisioned on the CMTS."
    INDEX { ccl2vpnPseudoWireType, ccl2vpnPeerIPAddressType, ccl2vpnPeerIPAddress, ccl2vpnVCID }
    ::= { ccl2vpnPWL2vpnIndexTable 1 }

Ccl2vpnPWL2vpnIndexEntry ::= SEQUENCE {
    ccl2vpnPseudoWireType CpwVcType,
    ccl2vpnPeerIPAddressType InetAddressType,
    ccl2vpnPeerIPAddress InetAddress,
    ccl2vpnVCID CpwVcIDType,
    ccl2vpnPWToL2vpnIndex CiscoCableL2vpnIndex
    }

ccl2vpnPseudoWireType OBJECT-TYPE
    SYNTAX CpwVcType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        frameRelay(1),
--        atmAal5Vcc(2),
--        atmTransparent(3),
--        ethernetVLAN(4),
--        ethernet(5),
--        hdlc(6),
--        ppp(7),
--        cep(8),
--        atmVccCell(9),
--        atmVpcCell(10),
--        ethernetVPLS(11),
--        e1Satop(12),
--        t1Satop(13),
--        e3Satop(14),
--        t3Satop(15),
--        basicCesPsn(16),
--        basicTdmIp(17),
--        tdmCasCesPsn(18),
--        tdmCasTdmIp(19)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the pseudo-wire type."
    ::= { ccl2vpnPWL2vpnIndexEntry 1 }

ccl2vpnPeerIPAddressType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the pseudo-wire peer IP address 
        type provisioned for L2VPN."
    ::= { ccl2vpnPWL2vpnIndexEntry 2 }

ccl2vpnPeerIPAddress OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the pseudo-wire peer IP address 
        provisioned for L2VPN. The type of this address is 
        determined by the value of ccl2vpnPeerIPAddressType 
        object."
    ::= { ccl2vpnPWL2vpnIndexEntry 3 }

ccl2vpnVCID OBJECT-TYPE
    SYNTAX CpwVcIDType
--    Rsyntax Gauge
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the Virtual Circuit Identifier 
        (VCID) of the pseudo-wire."
    ::= { ccl2vpnPWL2vpnIndexEntry 4 }

ccl2vpnPWToL2vpnIndex OBJECT-TYPE
    SYNTAX CiscoCableL2vpnIndex
--    Rsyntax Gauge(1..4294967295)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the L2vpnIndex assigned by CMTS 
        for this pseudo-wire peer IP address/VCID pair and for 
        this Cable Modem MAC Address/VPN."
    ::= { ccl2vpnPWL2vpnIndexEntry 5 }

ccl2vpnL2vpnIndexPWTable OBJECT-TYPE
    SYNTAX SEQUENCE OF Ccl2vpnL2vpnIndexPWEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "For every VPN provisioned for the L2VPN Cable Modem, 
        the CMTS establishes pseudo-wire. This table maps L2vpnIndex 
        to pseudo-wire configuration parameters."
    ::= { ciscoCableL2vpnMIBObjects 3 }

ccl2vpnL2vpnIndexPWEntry OBJECT-TYPE
    SYNTAX Ccl2vpnL2vpnIndexPWEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each row contains the L2vpnIndex for the pseudo-wire and 
        the corresponding configuration paramters including the 
        Cable Modem MAC address, VPN identifier, peer IP address, 
        Virtual Circuit Identifier (VCID) and pseudo-wire type. 
        Entry in this table is populated for each one of the 
        pseudo-wire provisioned on the CMTS."
    INDEX { ccl2vpnL2vpnIndex }
    ::= { ccl2vpnL2vpnIndexPWTable 1 }

Ccl2vpnL2vpnIndexPWEntry ::= SEQUENCE {
    ccl2vpnL2vpnIndex CiscoCableL2vpnIndex,
    ccl2vpnPWMAC MacAddress,
    ccl2vpnPWVpnId OCTET STRING,
    ccl2vpnPWPeerIPAddressType InetAddressType,
    ccl2vpnPWPeerIPAddress InetAddress,
    ccl2vpnPWType CpwVcType,
    ccl2vpnPWVCID CpwVcIDType
    }

ccl2vpnL2vpnIndex OBJECT-TYPE
    SYNTAX CiscoCableL2vpnIndex
--    Rsyntax Gauge(1..4294967295)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This object identifies the L2vpnIndex assigned for this 
        Cable Modem MAC Address/VPN pair by the CMTS."
    ::= { ccl2vpnL2vpnIndexPWEntry 1 }

ccl2vpnPWMAC OBJECT-TYPE
    SYNTAX MacAddress
--    Rsyntax OCTET STRING(SIZE(6))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the Cable Modem MAC address."
    ::= { ccl2vpnL2vpnIndexPWEntry 2 }

ccl2vpnPWVpnId OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..16))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the VPN Identifier provisioned for 
        L2VPN Cable Modem."
    ::= { ccl2vpnL2vpnIndexPWEntry 3 }

ccl2vpnPWPeerIPAddressType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the pseudo-wire peer IP address type."
    ::= { ccl2vpnL2vpnIndexPWEntry 4 }

ccl2vpnPWPeerIPAddress OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the pseudo-wire peer IP address. 
        The type of this address is determined by the value of  
        ccl2vpnPWPeerIPAddressType object."
    ::= { ccl2vpnL2vpnIndexPWEntry 5 }

ccl2vpnPWType OBJECT-TYPE
    SYNTAX CpwVcType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        other(0),
--        frameRelay(1),
--        atmAal5Vcc(2),
--        atmTransparent(3),
--        ethernetVLAN(4),
--        ethernet(5),
--        hdlc(6),
--        ppp(7),
--        cep(8),
--        atmVccCell(9),
--        atmVpcCell(10),
--        ethernetVPLS(11),
--        e1Satop(12),
--        t1Satop(13),
--        e3Satop(14),
--        t3Satop(15),
--        basicCesPsn(16),
--        basicTdmIp(17),
--        tdmCasCesPsn(18),
--        tdmCasTdmIp(19)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the pseudo-wire type."
    ::= { ccl2vpnL2vpnIndexPWEntry 6 }

ccl2vpnPWVCID OBJECT-TYPE
    SYNTAX CpwVcIDType
--    Rsyntax Gauge
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "This object identifies the Virtual Circuit Identifier (VCID) 
        for pseudo-wire."
    ::= { ccl2vpnL2vpnIndexPWEntry 7 }

ccl2vpnPWMappingGroup OBJECT IDENTIFIER ::= { ccl2vpnMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects providing Cable L2VPN pseudo-wire 
--    configuration.
--  objects
--    ccl2vpnPWMAC, ccl2vpnPWVpnId, ccl2vpnPWPeerIPAddressType, 
--    ccl2vpnPWPeerIPAddress, ccl2vpnPWType, ccl2vpnPWVCID, 
--    ccl2vpnMacVpnIdToL2vpnIndex, ccl2vpnPWToL2vpnIndex

ccl2vpnMIBCompliance OBJECT IDENTIFIER ::= { ccl2vpnMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for the CISCO-CABLE-L2VPN-MIB.
--  Module
--    >>current<<
--   MandGroup
--    ccl2vpnPWMappingGroup


END