-- ============================================================================
-- Copyright(C) 2002 - 2004 by  HUAWEI TECHNOLOGIES. All rights reserved.
-- 
-- Description: This MIB has been submitted as CCSA Standard,
-- And it had been accepted as the criterion of ChinaTelcom and CCSA Since 2003
-- Also this is the last formal version 
-- Reference:  
-- Version: V1.0
-- History:  
-- ============================================================================
CPE-DSL-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			atmVclVpi, atmVclVci			
				FROM ATM-MIB			
			ifIndex			
				FROM IF-MIB			
			enterprises, IpAddress, Integer32, Unsigned32, OBJECT-TYPE, 
			   MODULE-IDENTITY,  NOTIFICATION-TYPE			
				FROM SNMPv2-SMI			
			DisplayString, RowStatus, DateAndTime,TEXTUAL-CONVENTION			
				FROM SNMPv2-TC;
	
		cpeDSL MODULE-IDENTITY 
			LAST-UPDATED "200411270900Z"
			ORGANIZATION "Fix-Net Dept, Huawei Technologies Co.,Ltd."
			CONTACT-INFO 
				"Block 4, R&D Building,
				Huawei Longgang Production Base,
				Shenzhen,   P.R.C.
				http://www.huawei.com
				Zip: 518129
				"
			DESCRIPTION 
				"
				xDSL CPE MIB."
			::= { enterprises 16972	 }  

		EnableAdmin ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				Enable operation switch "
			SYNTAX INTEGER
				{
				enable(1),
				disable(2)
				}
			
		PvcIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of PVC AAL5"
			SYNTAX Integer32 (150000..159999)
			
		PppIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of PPP."
			SYNTAX Integer32 (210000..219999)
			

		EthernetIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of Ethernet interface."
			SYNTAX Integer32 (10000..19999)

		UsbIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of usb interface."
			SYNTAX Integer32 (20000..29999)

		Ieee8022Dot1xIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of 802.1X interface."
			SYNTAX Integer32 (30000..39999)

		AdslIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of ADSL interface."
			SYNTAX Integer32 (40000..49999)

		ModemIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of Modem interface."
			SYNTAX Integer32 (50000..59999)

		Rs232IfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of RS232 interface."
			SYNTAX Integer32 (60000..69999)

		BridgeIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of bridge interface."
			SYNTAX Integer32 (110000..119999)

		AdslInterLeaveIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of ADSL interleave mode interface."
			SYNTAX Integer32 (120000..129999)

		AdslFastIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of ADSL fast mode interface."
			SYNTAX Integer32 (130000..139999)

		AdslAtmIfIndexRange ::= TEXTUAL-CONVENTION
			STATUS current
			DESCRIPTION 
				"
				ifIndex range of ATM interface."
			SYNTAX Integer32 (140000..149999)

   
   
		cpeSysInfo OBJECT IDENTIFIER ::= { cpeDSL 1 }

		cpeSysInfoUptime OBJECT-TYPE
			SYNTAX Integer32
			UNITS "Seconds"
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				It is the working time since CPE rebooted. "
			::= { cpeSysInfo 1 }
		
		cpeSysInfoConfigId OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..4))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				" for synchronizing  configuration by network manager
				"
			::= { cpeSysInfo 2 }
		
		cpeSysInfoFirmwareVersion OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..32))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				Chipset version information. 
               			"
			::= { cpeSysInfo 3 }
		
		cpeSysInfoProductId OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..16))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				CPE product module,For example, the 'MT800' is the product id.
				"
			::= { cpeSysInfo 4 }
		
		cpeSysInfoVendorId OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..32))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the name of CPE vendor.
				"
			::= { cpeSysInfo 5 }
		
		cpeSysInfoSystemVersion OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..32))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				CPE system version
                		"
			::= { cpeSysInfo 6 }
		
		cpeSysInfoWorkMode  OBJECT-TYPE
			SYNTAX INTEGER
				{
				bridge(1),
				router(2)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				CPE s work mode. "
			::= { cpeSysInfo 7 }

		cpeSysInfoMibVersion OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..8))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"The MIB's version,now the vaersion is  V1.00 "
			::= { cpeSysInfo 8 }
		
		cpeSysInfoSerialNumber OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..32))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				The CPE's BAR CODE including serial number to identify itself to each other
				it is embedded by equipment provider while manufacturing ."
			::= { cpeSysInfo 9 }

		cpeSysInfoManufacturerOui  OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..6))
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the OUI (Organizationally Unique Identifier) of IEEE standard organization  
                 		provided.
				For example, this huawei CPE ADSL is 00E0FC			"
			::= { cpeSysInfo 10 }
		
		cpeConfig OBJECT IDENTIFIER ::= { cpeDSL 2 }
		
		cpeSystem OBJECT IDENTIFIER ::= { cpeConfig 1 }
		
		cpeSystemReboot OBJECT-TYPE
			SYNTAX INTEGER { reboot(1) }
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Rebooting CPE s operation
				"
			::= { cpeSystem 1 }
		
		cpeSystemSave OBJECT-TYPE
			SYNTAX INTEGER { save(1) }
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				saving the CPE s configuration to NVRAM "
			::= { cpeSystem 2 }
		
		cpeSystemRestore OBJECT-TYPE
			SYNTAX INTEGER
				{
				restoreToNull(1),
				restoreToDefault(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				Restore CPE s configuration 
				restoreToNull(1),   clear all of the configuration
				restoreToDefault(2) restore to default configuration
                            "
			::= { cpeSystem 3 }
		
		cpeSystemTrapEnable OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"				
				trap notification switch, if set to  Disable  
				CPE will not send trap notification untill it is set to  enable  
				"
			DEFVAL { enable }
			::= { cpeSystem 4 }
		
		cpeBootTrapResponse OBJECT-TYPE
			SYNTAX INTEGER
				{
				noResponse(1),
				responseCfgReady(2),
		                responseReCfg(3)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				It is the boottrap response identity 
				Every time,when CPE is rebooted, it is set to 'noResponse' "
			DEFVAL { noResponse }
			::= { cpeSystem 5 }
		
		cpeReservedString OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE (0..255))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				It is the reserved string "
			::= { cpeSystem 6 }
		
		cpeConfigAdslLine OBJECT IDENTIFIER ::= { cpeConfig 2 }
		
		cpeConfigAdslLineTrellis OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				trellis encoding configuration. 
				"
			DEFVAL { enable }
			::= { cpeConfigAdslLine 1 }
		
		cpeConfigAdslLineHandshake OBJECT-TYPE
			SYNTAX INTEGER
				{
				autosenseGdmtFirst(1),   
				autosenseT1413First(2),  
				gdmtOrLite(3),  
				t1413(4),  
				gdmt(5),  
				glite(6),  
				autosense(7) 
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				link handshake negotiation mode configuration 	    
				"
			DEFVAL { autosense }
			::= { cpeConfigAdslLine 2 }

		cpeConfigAdslLineBitSwapping OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				BITSWAP encoding configuration 
				"
			DEFVAL { enable }
			::= { cpeConfigAdslLine 3 }
		
		cpePvcTable OBJECT-TYPE
			SYNTAX SEQUENCE OF CpePvcEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				PVC VCL configuration table
				It is RFC2515 ATM-MIB atmVclTable s extended table
				"
			::= { cpeConfig 3 }
		
		cpePvcEntry OBJECT-TYPE
			SYNTAX CpePvcEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				PVC VCL configuration entry
				"
			INDEX { ifIndex, atmVclVpi, atmVclVci }
			::= { cpePvcTable 1 }
		
		CpePvcEntry ::=
			SEQUENCE { 
				cpePvcId 
					Integer32,
				cpePvcIfIndex 
					PvcIfIndexRange,
				cpePvcUpperEncapsulation
					INTEGER,
				cpePvcAdminStatus
					INTEGER,
				cpePvcOperStatus
					INTEGER,
				cpePvcBridgeMode
					EnableAdmin,
				cpePvcMacLearnMode
					EnableAdmin,
				cpePvcIgmpMode
					EnableAdmin,
				cpePvcDhcpClientMode 
					EnableAdmin,
				cpePvcNatMode
					EnableAdmin
			 }

          	cpePvcId OBJECT-TYPE
	     		SYNTAX Integer32
	     		MAX-ACCESS read-only
	     		STATUS current
	     		DESCRIPTION
		     	"
		 	PVC number It is used for  identify PVC in CPE"
	     		::= { cpePvcEntry 1 }

		cpePvcIfIndex OBJECT-TYPE
			SYNTAX PvcIfIndexRange
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				this parameter is used for bonding upper layer service s index
				"
			::= { cpePvcEntry 3 }
		
		cpePvcUpperEncapsulation OBJECT-TYPE
			SYNTAX INTEGER
				{
				pppoA(1),
				pppoE(2),
				router2684(3),
				pureBridge2684(4),
				bridge2684PlusIp(5),
				ilmi(7)
				
				}
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				PVC service encapsulation type
				"
			DEFVAL { pureBridge2684 }  
			::= { cpePvcEntry 4 }

		cpePvcAdminStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				up(1),
				down(2)
				}
			MAX-ACCESS read-create
			STATUS deprecated
			DESCRIPTION
				"
				PVC active and deactive operation,
				We suggest to use the atmVclAdminStatus
				in the vclTableof ATM-MIB instead ofcpePvcAdminStatus   
				"
			::= { cpePvcEntry 5 }
		
		cpePvcOperStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				up(1),
				down(2)
				}
			MAX-ACCESS read-only
			STATUS deprecated
			DESCRIPTION
				"
				PVC active and deactive status.
				We suggest to use the atmVclOperStatus
				in the vclTableof ATM-MIB instead of cpePvcOperStatus "
			::= { cpePvcEntry 6 }

		cpePvcBridgeMode OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				bridge mode configuration 
				only when cpePvcUpperEncapsulation is set to 'bridge2684'  
				this configuration  is available
				"
			DEFVAL { enable }
			::= { cpePvcEntry 7 }
		
		cpePvcMacLearnMode OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-create
			STATUS deprecated 
			DESCRIPTION
				"
				MAC address learn mode configuration,
				it's no use."
			DEFVAL { disable}
			::= { cpePvcEntry 8 }
		
		cpePvcIgmpMode OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				if IGMP traffic and internet traffic service is beared by different PVC 
				It  can  be configured by this parameter"
			DEFVAL { enable }
			::= { cpePvcEntry 9 }

	         cpePvcDhcpClientMode  OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				DHCP client mode configuration"
			DEFVAL { disable }
			::= { cpePvcEntry 10 }


		cpePvcNatMode OBJECT-TYPE
			SYNTAX EnableAdmin
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				NAT mode configuration"
			DEFVAL { enable }
			::= { cpePvcEntry 11 }


		
		cpePppTable OBJECT-TYPE
			SYNTAX SEQUENCE OF CpePppEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				PPP configuration table,it is pppSecuritySecretsTable s extended table 
				pppSecuritySecretsLink is set to 0  
				cpePppIfIndex   pppSecuritySecretsIdIndex  
				"
			::= { cpeConfig 4 }
		
		cpePppEntry OBJECT-TYPE
			SYNTAX CpePppEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				PPP configuration entry"
			INDEX { cpePppIfIndex }
			::= { cpePppTable 1 }
		
		CpePppEntry ::=
			SEQUENCE { 
				cpePppIfIndex
					PppIfIndexRange,
				cpePppPvcIfIndex
					PvcIfIndexRange,
				cpePppServiceName
					DisplayString,
				cpePppDisconnectTimeout
					INTEGER,
				cpePppMSS
					INTEGER,
				cpePppRowStatus
					RowStatus,
				cpePppAdminStatus
					INTEGER,
				cpePppOperStatus
					INTEGER,
				cpePppTestResult
					INTEGER

			 }

		cpePppIfIndex OBJECT-TYPE
			SYNTAX PppIfIndexRange
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"				
				ppp s index "
			::= { cpePppEntry 1 }
		
		cpePppPvcIfIndex OBJECT-TYPE
			SYNTAX PvcIfIndexRange
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				the lower layer logic interface index for ppp,also
				the ATM layer logic interface index for ppp,the value is the same as 
				cpePvcIfindex"
			::= { cpePppEntry 2 }
		
		cpePppServiceName OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..31))
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				 PPP service name "
                 
			DEFVAL { "" }
			::= { cpePppEntry 3 }
		
		cpePppDisconnectTimeout OBJECT-TYPE
			SYNTAX INTEGER (0..32767)
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				PPP idle disconnect timeout parameter, if it is set to zero, 
				the PPP connection will not Be  disconnected. If it not set 
				to zero, the PPP  will be disconnected if there is no traffic on
				the PPP for the specified period."
			DEFVAL { 0 }
			::= { cpePppEntry 4 }
		
		cpePppMSS OBJECT-TYPE
			SYNTAX INTEGER (0..32767)
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				PPP s max segment size"
			DEFVAL { 1432 }
			::= { cpePppEntry 5 }
		
		cpePppRowStatus OBJECT-TYPE
			SYNTAX RowStatus
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				PPP table s row status"
			::= { cpePppEntry 6 }


		cpePppAdminStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				up(1),
				down(2),
				test(3),
				cancel(4)			
				}
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				Ppp link operation
				up(1),  	activate operation
				down(2), 	deactivate operation
				test(3),   	PPP test,test operating should generated an trap
						after it is done.
                cannel(4),stop the PPP testing
				"
			::= { cpePppEntry 7}
		
		cpePppOperStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				up(1),
				down(2)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				ppp link status
				up(1):  active status
				down(2):deactive status
				"
			::= { cpePppEntry 8}

		cpePppTestResult OBJECT-TYPE
			SYNTAX INTEGER
				{
				success(1), 
                                testing(2),
				authFail(3),
				failure(4)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				ppp test result 
				success(1),
                                testing(2)
				authFail(3),
				failure(4) 
				"
			::= { cpePppEntry 9 }

		
		cpeIpTable OBJECT-TYPE
			SYNTAX SEQUENCE OF CpeIpEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				IP address table"
			::= { cpeConfig 5 }
		
		cpeIpEntry OBJECT-TYPE
			SYNTAX CpeIpEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				Interface s IP address entry"
			INDEX { cpeIpIndex }
			::= { cpeIpTable 1 }
		
		CpeIpEntry ::=
			SEQUENCE { 
				cpeIpIndex
					Unsigned32,
				cpeIpLowerIfIndex
					Integer32,
				cpeIpAddress
					IpAddress,
				cpeIpNetmask
					IpAddress,
				cpeIpGateway
					IpAddress,
				cpeIpRowStatus
					RowStatus
			 }

		cpeIpIndex OBJECT-TYPE
			SYNTAX Unsigned32
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				IP address table s index"
			::= { cpeIpEntry 1 }
		
		cpeIpLowerIfIndex OBJECT-TYPE
			SYNTAX Integer32
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				lower layer s logic index"
			::= { cpeIpEntry 2 }
		
		cpeIpAddress OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				IP address"
			::= { cpeIpEntry 3 }
		
		cpeIpNetmask OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				IP address netmask"
			::= { cpeIpEntry 4 }
		
		cpeIpGateway OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				the gateway address, NMS could config it only when the IP is gained by static mode,
				otherwise ,it can be  read-ony mode. "
			::= { cpeIpEntry 5 }
		
		cpeIpRowStatus OBJECT-TYPE
			SYNTAX RowStatus
			MAX-ACCESS read-create
			STATUS current
			DESCRIPTION
				"
				the row status of IP address table"
			::= { cpeIpEntry 6 }
		
		cpeLanDhcp OBJECT IDENTIFIER ::= { cpeConfig 6 }
		
		cpeLanDhcpAdminStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				noSupport(1),
				dhcpServer(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				dhcp mode configuration 
				noSupport(1), no support dhcp 
				dhcpServer(2),support dhcp server 
				"
			DEFVAL { noSupport }
			::= { cpeLanDhcp 1 }
	

		cpeWanDns OBJECT IDENTIFIER ::= { cpeConfig 7}
		cpeDnsPrimaryAddress OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the primary DNS IP address"
			::= { cpeWanDns 1}
		
		cpeDnsSecondAddress OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the secondary DNS IP address"
			::= { cpeWanDns 2}

	
		cpeSysLog OBJECT IDENTIFIER ::= { cpeDSL 3 }
		
		cpeSysLogBeginTime OBJECT-TYPE
			SYNTAX DateAndTime
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				syslog requery s begin time
				"
			::= { cpeSysLog 1 }
		
		cpeSysLogEndTime OBJECT-TYPE
			SYNTAX DateAndTime
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				syslog requery s end time 
				"
			::= { cpeSysLog 2 }
		
		cpeSysLogAdminStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				start(1),   
				clear(2)    
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
			"
			 requery syslog operation 
				start(1),  start requery syslog 
				clear(2),  clear CPE s syslog record"
			
			::= { cpeSysLog 3 }
		
		cpeSysLogTable OBJECT-TYPE
			SYNTAX SEQUENCE OF CpeSysLogEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				syslog record s table"
			::= { cpeSysLog 4 }
		
		cpeSysLogEntry OBJECT-TYPE
			SYNTAX CpeSysLogEntry
			MAX-ACCESS not-accessible
			STATUS current
			DESCRIPTION
				"
				syslog record s entry "
			INDEX { cpeSysLogIndex }
			::= { cpeSysLogTable 1 }
		
		CpeSysLogEntry ::=
			SEQUENCE { 
				cpeSysLogIndex
					Unsigned32,
				cpeSysLogContent
					DisplayString
			 }

		cpeSysLogIndex OBJECT-TYPE
			SYNTAX Unsigned32
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the syslog record s index "
			::= { cpeSysLogEntry 1 }
		
		cpeSysLogContent OBJECT-TYPE
			SYNTAX DisplayString
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the syslog s detail description "
			::= { cpeSysLogEntry 2 }

		cpeFtp OBJECT IDENTIFIER ::= { cpeDSL 4 }
		
		cpeFtpIP OBJECT-TYPE
			SYNTAX IpAddress
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the FTP Server s IP address"
			::= { cpeFtp 1 }
		
		cpeFtpUser OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..127))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the user name for FTP"
			::= { cpeFtp 2 }
		
		cpeFtpPasswd OBJECT-TYPE
			SYNTAX DisplayString (SIZE (0..127))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the access password for FTP"
			::= { cpeFtp 3 }
		
		cpeFtpFileName OBJECT-TYPE
			SYNTAX DisplayString (SIZE (4..255))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the file name for ftp download which is saved in FTP server.
				"
			::= { cpeFtp 4 }
		

		cpeFtpAdminStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				stop(1),
				upgrade(2),
				ftpTest(3)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				FTP administration operation"
			::= { cpeFtp 5 }
		
		cpeFtpOperStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				normal(1),
				connectSuccess(2),
				connectFailure(3),
				downloading(4),
				downloadSuccess(5),
				downloadFailure(6),
				saving(7),
				saveFailure(8),
				upgradeSuccess(9),
				upgradeFailure(10)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				FTP administration status
				"
			::= { cpeFtp 6 }
		
		cpeFtpTotalSize OBJECT-TYPE
			SYNTAX Integer32
			UNITS "Kbyte"
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the file s total size for download unit is Kbyte "
			::= { cpeFtp 8 }
		
		cpeFtpDoneSize OBJECT-TYPE
			SYNTAX Integer32
			UNITS "Kbyte"
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the file s size which is already download  unit is Kbyte"
			::= { cpeFtp 9 }
		
		cpeFtpElapseTime OBJECT-TYPE
			SYNTAX Integer32
			UNITS "second"
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				the elapse time for FTP download "
			::= { cpeFtp 10 }
		
		cpeDiagnose OBJECT IDENTIFIER ::= { cpeDSL 5 }
		
		cpePing OBJECT IDENTIFIER ::= { cpeDiagnose 1 }
		
		cpePingAddr OBJECT-TYPE
			SYNTAX DisplayString (SIZE (4..255))
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				 the destination IP address for ping test either IP or Domain name"
			DEFVAL { "http://www.chinatelecom.com.cn" }
			::= { cpePing 1 }
		
		cpePingPkgSize OBJECT-TYPE
			SYNTAX INTEGER (32..4096)
			UNITS "byte"
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the packet size for ping test "
			DEFVAL { 32 }
			::= { cpePing 2 }
		
		cpePingCount OBJECT-TYPE
			SYNTAX INTEGER (0..32767)
			UNITS "unit"
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				the count of sending packets for ping test"
			DEFVAL { 4 }
			::= { cpePing 3 }
		
		cpePingAdminStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				stop(1),
				start(2)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"
				ping test operation
				stop(1), start ping test
				start(2) stop ping test
				"
			::= { cpePing 4 }
		

		cpePingOperStatus OBJECT-TYPE
			SYNTAX INTEGER
				{
				normal(1),
				pinging(2),
				success(3),
				failure(4)
				}
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				ping test operation status
				"
			::= { cpePing 5 }
		
		cpePingResult OBJECT-TYPE
			SYNTAX DisplayString
			MAX-ACCESS read-only
			STATUS current
			DESCRIPTION
				"
				 ping test result 
				  IP   10.1.1.100
				  Sent     = xx 
				  Received = xx 
				  Lost     = xx 
				  Min      = xx ms 
				  Max      = xx ms 
				  Average  = xx ms
				"
			::= { cpePing 6 }
		
		cpeTrap OBJECT IDENTIFIER ::= { cpeDSL 6 }
		
		cpeTraps OBJECT IDENTIFIER ::= { cpeTrap 0 }
		
		cpeBootTrap NOTIFICATION-TYPE
			OBJECTS { cpeSysInfoConfigId, cpeSysInfoFirmwareVersion, cpeSysInfoProductId,
				  cpeSysInfoVendorId, cpeSysInfoManufacturerOui,cpeSysInfoSystemVersion, 
                    		  cpeSysInfoWorkMode, cpeSysInfoMibVersion ,cpeSysInfoSerialNumber
				  
				}
			STATUS current
			DESCRIPTION 
				"
				trap notification when CPE is rebooted. CPE is needed to send all parameters  
                in one trap packet.
				"
			::= { cpeTraps 1 }
		
		cpeFtpDone NOTIFICATION-TYPE
			OBJECTS { cpeFtpAdminStatus, cpeFtpOperStatus, cpeFtpTotalSize, 
				cpeFtpDoneSize, cpeFtpElapseTime}
			STATUS current
			DESCRIPTION 
				"
				trap notification when ftp download is finished "
			::= { cpeTraps 2 }
		
		cpePingDone NOTIFICATION-TYPE
			OBJECTS { cpePingOperStatus, cpePingResult}
			STATUS current
			DESCRIPTION 
				"
				trap notification when PING test is finished 
                 		"
			::= { cpeTraps 3 }

		cpePppTestDone NOTIFICATION-TYPE
			OBJECTS { cpePppTestResult }
			STATUS current
			DESCRIPTION 
				"
				trap notification when PPP test is finished"
			::= { cpeTraps 4 }
		
	
	END