DEC-ATM-SIGNALLING-MIB DEFINITIONS ::= BEGIN -- -- Definitions of Managed Objects for Digital Equipment Corporation's -- ATM Switch "Signalling" MIB" -- ============================ -- -- -- -- -- Name: dec-atm-signalling-mib-v1-0.txt -- Version: 1.0 -- Date: September, 1996 -- Company: Digital Equipment Corporation -- Mail: TBD -- -- -- -- -- -- This Digital Equipment Corporation SNMP Management Information Base -- Specification embodies Digital Equipment Corporation's confidential and -- proprietary intellectual property. Digital Equipment Corporation -- retains all title and ownership in the Specification, including any -- revisions. -- -- It is Digital Equipment Corporation's intent to encourage the widespread -- use of this Specification in connection with the management of Digital -- Equipment Corporation products. -- -- Digital Equipment Corporation grants vendors, end-users, and other -- interested parties a non-exclusive license to use this Specification in -- connection with the management of Digital Equipment Corporation -- products. -- -- Digital Equipment Corporation reserves the right to make changes in this -- specification and other information contained in this document without -- prior notice. -- -- Digital Equipment Corporation makes no warranty, either expressed or -- implied, as to the use, operation, condition, or performance of the -- Specification. In no event shall Digital Equipment Corporation be -- liable for any incidental, indirect, special, or consequential damages -- whatsoever (including but not limited to loss of profits) arising out of -- or related to this document or the information contained in it. -- -- -- -- -- Object Synopsis -- -- All objects within this MIB are prefixed with the OBJECT IDENTIFIER "p", -- where "p" is: -- -- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). -- dec(36).ema(2).decMIBextension(18).decAtmSignallingMIB(34) -- -- or, 1.3.6.1.4.1.36.2.18.34 -- -- -- Object Name Object Id Non-vol -- ================================== ================ ======= -- -- decAtmSignallingMIB p -- decAtmSignallingMIBObjects p.1 -- decSignallingGroup p.1.1 -- decSignallingConfigTable p.1.1.1 -- decSignallingConfigEntry p.1.1.1.1 -- decAtmSignallingIndex p.1.1.1.1.1 -- decAtmSignallingMode p.1.1.1.1.2 -- decQ2931Group p.1.2 -- decQ2931MsgTable p.1.2.1 -- decQ2931MsgEntry p.1.2.1.1 -- callProceedingTx p.1.2.1.1.1 -- callProceedingRx p.1.2.1.1.2 -- connectTx p.1.2.1.1.3 -- connectRx p.1.2.1.1.4 -- connectAcknowledgeTx p.1.2.1.1.5 -- connectAcknowledgeRx p.1.2.1.1.6 -- setupTx p.1.2.1.1.7 -- setupRx p.1.2.1.1.8 -- releaseTx p.1.2.1.1.9 -- releaseRx p.1.2.1.1.10 -- releaseCompleteTx p.1.2.1.1.11 -- releaseCompleteRx p.1.2.1.1.12 -- restartTx p.1.2.1.1.13 -- restartRx p.1.2.1.1.14 -- restartAcknowledgeTx p.1.2.1.1.15 -- restartAcknowledgeRx p.1.2.1.1.16 -- statusTx p.1.2.1.1.17 -- statusRx p.1.2.1.1.18 -- statusEnquiryTx p.1.2.1.1.19 -- statusEnquiryRx p.1.2.1.1.20 -- addPartyTx p.1.2.1.1.21 -- addPartyRx p.1.2.1.1.22 -- addPartyAcknowledgeTx p.1.2.1.1.23 -- addPartyAcknowledgeRx p.1.2.1.1.24 -- addPartyRejectTx p.1.2.1.1.25 -- addPartyRejectRx p.1.2.1.1.26 -- dropPartyTx p.1.2.1.1.27 -- dropPartyRx p.1.2.1.1.28 -- dropPartyAcknowledgeTx p.1.2.1.1.29 -- dropPartyAcknowledgeRx p.1.2.1.1.30 -- decQ2931StatusTable p.1.2.2 -- decQ2931StatusEntry p.1.2.2.1 -- totalConns p.1.2.2.1.1 -- activeConns p.1.2.2.1.2 -- lastTxCause p.1.2.2.1.3 -- lastTxDiagnostic p.1.2.2.1.4 -- lastRxCause p.1.2.2.1.5 -- lastRxDiagnostic p.1.2.2.1.6 -- decQ2931TimerTable p.1.2.3 -- decQ2931TimerEntry p.1.2.3.1 -- t303 p.1.2.3.1.1 -- t308 p.1.2.3.1.2 -- t309 p.1.3.3.1.3 -- t310 p.1.2.3.1.4 -- t313 p.1.2.3.1.5 -- t316 p.1.2.3.1.6 -- t317 p.1.2.3.1.7 -- t322 p.1.2.3.1.8 -- t398 p.1.2.3.1.9 -- t399 p.1.2.3.1.10 -- decQSaalGroup p.1.3 -- decQSaalMsgTable p.1.3.1 -- decQSaalMsgEntry p.1.3.1.1 -- txDiscardedSdus p.1.3.1.1.1 -- rxErrorPdus p.1.3.1.1.2 -- txErrorPdus p.1.3.1.1.3 -- rxDiscardedPdus p.1.3.1.1.4 -- txDiscardedPdus p.1.3.1.1.5 -- bgnTx p.1.3.1.1.6 -- bgnRx p.1.3.1.1.7 -- bgakTx p.1.3.1.1.8 -- bgakRx p.1.3.1.1.9 -- endTx p.1.3.1.1.10 -- endRx p.1.3.1.1.11 -- endakTx p.1.3.1.1.12 -- endakRx p.1.3.1.1.13 -- rsTx p.1.3.1.1.14 -- rsRx p.1.3.1.1.15 -- rsakTx p.1.3.1.1.16 -- rsakRx p.1.3.1.1.17 -- bgrejTx p.1.3.1.1.18 -- bgrejRx p.1.3.1.1.19 -- sdTx p.1.3.1.1.20 -- sdRx p.1.3.1.1.21 -- sdpTx p.1.3.1.1.22 -- sdpRx p.1.3.1.1.23 -- erTx p.1.3.1.1.24 -- erRx p.1.3.1.1.25 -- pollTx p.1.3.1.1.26 -- pollRx p.1.3.1.1.27 -- statTx p.1.3.1.1.28 -- statRx p.1.3.1.1.29 -- ustatTx p.1.3.1.1.30 -- ustatRx p.1.3.1.1.31 -- udTx p.1.3.1.1.32 -- udRx p.1.3.1.1.33 -- mdTx p.1.3.1.1.34 -- mdRx p.1.3.1.1.35 -- erakTx p.1.3.1.1.36 -- erakRx p.1.3.1.1.37 -- =========================================================================== -- ===================== S t a r t o f M I B ========================== -- =========================================================================== IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ifIndex FROM RFC1213-MIB decMIBextension FROM DECATM-MIB; -- Path to the signalling MIB. -- dec OBJECT IDENTIFIER ::= { enterprises 36 } -- ema OBJECT IDENTIFIER ::= { dec 2 } -- decMIBextension OBJECT IDENTIFIER ::= { ema 18 } -- The DEC ATM signalling MIB. -- decAtmSignallingMIB MODULE-IDENTITY -- -- LAST-UPDATED "9609060000Z" -- ORGANIZATION "Digital Equipment Corporation" -- CONTACT-INFO -- -- "Digital Equipment Corporation -- 550 King Street -- Littleton, MA 01460 -- United States of America" -- -- DESCRIPTION -- -- "This module defines a portion of the management information -- base (MIB) for DEC ATM switches, including GIGAswitch/ATM." -- -- ::= { decMIBextension 34 } decAtmSignallingMIB OBJECT IDENTIFIER ::= { decMIBextension 34 } decAtmSignallingMIBObjects OBJECT IDENTIFIER ::= { decAtmSignallingMIB 1 } -- =========================================================================== -- ====================== T h e L i n k G r o u p ====================== -- =========================================================================== -- -- This group is mandatory. -- decSignallingGroup OBJECT IDENTIFIER ::= { decAtmSignallingMIBObjects 1 } decSignallingConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DecSignallingConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { decSignallingGroup 1 } decSignallingConfigEntry OBJECT-TYPE SYNTAX DecSignallingConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry describes one UNI / NNI. Note that the table is indexed by 'atm' interfaces, rather than 'aal5' entities." INDEX { ifIndex, decAtmSignallingIndex } ::= { decSignallingConfigTable 1 } DecSignallingConfigEntry ::= SEQUENCE { decAtmSignallingIndex INTEGER, decAtmSignallingMode INTEGER } decAtmSignallingIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An arbitrary integer index that can be used to distinguish among multiple signalling entities for the same (physical) interface." ::= { decSignallingConfigEntry 1 } decAtmSignallingMode OBJECT-TYPE SYNTAX INTEGER { autoConfigure(1), pnni(2), uni30(3), uni31(4), uni40(5) } ACCESS read-write -- MIN-ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the mode in which the port is configured to run." ::= { decSignallingConfigEntry 2 } -- =========================================================================== -- ==================== T h e Q 2 9 3 1 G r o u p ====================== -- =========================================================================== -- -- This group has both mandatory and optional subgroups, as noted below. -- decQ2931Group OBJECT IDENTIFIER ::= { decAtmSignallingMIBObjects 2 } -- =========================================================================== -- ========= T h e Q 2 9 3 1 S t a t i s t i c s T a b l e s ========== -- =========================================================================== -- -- This table is mandatory. -- decQ2931MsgTable OBJECT-TYPE SYNTAX SEQUENCE OF DecQ2931MsgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes the number of call/connection processing messages sent and received on each UNI or NNI." ::= { decQ2931Group 1 } decQ2931MsgEntry OBJECT-TYPE SYNTAX DecQ2931MsgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains signalling statistics for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType = 'aal5')." INDEX { ifIndex, decAtmSignallingIndex } ::= { decQ2931MsgTable 1 } DecQ2931MsgEntry ::= SEQUENCE { callProceedingTx Counter, callProceedingRx Counter, connectTx Counter, connectRx Counter, connectAcknowledgeTx Counter, connectAcknowledgeRx Counter, setupTx Counter, setupRx Counter, releaseTx Counter, releaseRx Counter, releaseCompleteTx Counter, releaseCompleteRx Counter, restartTx Counter, restartRx Counter, restartAcknowledgeTx Counter, restartAcknowledgeRx Counter, statusTx Counter, statusRx Counter, statusEnquiryTx Counter, statusEnquiryRx Counter, addPartyTx Counter, addPartyRx Counter, addPartyAcknowledgeTx Counter, addPartyAcknowledgeRx Counter, addPartyRejectTx Counter, addPartyRejectRx Counter, dropPartyTx Counter, dropPartyRx Counter, dropPartyAcknowledgeTx Counter, dropPartyAcknowledgeRx Counter } callProceedingTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CALL PROCEEDING messages transmitted on this interface." ::= { decQ2931MsgEntry 1 } callProceedingRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CALL PROCEEDING messages received on this interface." ::= { decQ2931MsgEntry 2 } connectTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONNECT messages transmitted on this interface." ::= { decQ2931MsgEntry 3 } connectRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONNECT messages received on this interface." ::= { decQ2931MsgEntry 4 } connectAcknowledgeTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONNECT ACKNOWLEDGE messages transmitted on this interface." ::= { decQ2931MsgEntry 5 } connectAcknowledgeRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of CONNECT ACKNOWLEDGE messages received on this interface." ::= { decQ2931MsgEntry 6 } setupTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SETUP messages transmitted on this interface." ::= { decQ2931MsgEntry 7 } setupRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SETUP messages received on this interface." ::= { decQ2931MsgEntry 8 } releaseTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RELEASE messages transmitted on this interface." ::= { decQ2931MsgEntry 9 } releaseRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RELEASE messages received on this interface." ::= { decQ2931MsgEntry 10 } releaseCompleteTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RELEASE COMPLETE messages transmitted on this interface." ::= { decQ2931MsgEntry 11 } releaseCompleteRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RELEASE COMPLETE messages received on this interface." ::= { decQ2931MsgEntry 12 } restartTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RESTART messages transmitted on this interface." ::= { decQ2931MsgEntry 13 } restartRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RESTART messages received on this interface." ::= { decQ2931MsgEntry 14 } restartAcknowledgeTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RESTART ACKNOWLEDGE messages transmitted on this interface." ::= { decQ2931MsgEntry 15 } restartAcknowledgeRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RESTART ACKNOWLEDGE messages received on this interface." ::= { decQ2931MsgEntry 16 } statusTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of STATUS messages transmitted on this interface." ::= { decQ2931MsgEntry 17 } statusRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of STATUS messages received on this interface." ::= { decQ2931MsgEntry 18 } statusEnquiryTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of STATUS ENQUIRY messages transmitted on this interface." ::= { decQ2931MsgEntry 19 } statusEnquiryRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of STATUS ENQUIRY messages received on this interface." ::= { decQ2931MsgEntry 20 } addPartyTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADD PARTY messages transmitted on this interface." ::= { decQ2931MsgEntry 21 } addPartyRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADD PARTY messages received on this interface." ::= { decQ2931MsgEntry 22 } addPartyAcknowledgeTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADD PARTY ACKNOWLEDGE messages transmitted on this interface." ::= { decQ2931MsgEntry 23 } addPartyAcknowledgeRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADD PARTY ACKNOWLEDGE messages received on this interface." ::= { decQ2931MsgEntry 24 } addPartyRejectTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADD PARTY REJECT messages transmitted on this interface." ::= { decQ2931MsgEntry 25 } addPartyRejectRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ADD PARTY REJECT messages received on this interface." ::= { decQ2931MsgEntry 26 } dropPartyTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DROP PARTY messages transmitted on this interface." ::= { decQ2931MsgEntry 27 } dropPartyRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DROP PARTY messages received on this interface." ::= { decQ2931MsgEntry 28 } dropPartyAcknowledgeTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DROP PARTY ACKNOWLEDGE messages transmitted on this interface." ::= { decQ2931MsgEntry 29 } dropPartyAcknowledgeRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of DROP PARTY ACKNOWLEDGE messages received on this interface." ::= { decQ2931MsgEntry 30 } -- -- This table is mandatory. -- decQ2931StatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DecQ2931StatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Contains additional Q2931 signalling statistics." ::= { decQ2931Group 2 } decQ2931StatusEntry OBJECT-TYPE SYNTAX DecQ2931StatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains signalling statistics for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType = 'aal5')." INDEX { ifIndex, decAtmSignallingIndex } ::= { decQ2931StatusTable 1 } DecQ2931StatusEntry ::= SEQUENCE { totalConns INTEGER, activeConns INTEGER, lastTxCause INTEGER, lastTxDiagnostic INTEGER, lastRxCause INTEGER, lastRxDiagnostic INTEGER } totalConns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of connections established so far." ::= { decQ2931StatusEntry 1 } activeConns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently-active connections." ::= { decQ2931StatusEntry 2 } lastTxCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The most recently transmitted cause code." ::= { decQ2931StatusEntry 3 } lastTxDiagnostic OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The most recently transmitted diagnostic code." ::= { decQ2931StatusEntry 4 } lastRxCause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The most recently received cause code." ::= { decQ2931StatusEntry 5 } lastRxDiagnostic OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The most recently received diagnostic code." ::= { decQ2931StatusEntry 6 } -- =========================================================================== -- ============== T h e Q 2 9 3 1 T i m e r s T a b l e =============== -- =========================================================================== -- -- This table is optional. It lets network managers examine and configure -- the Q.2931 timeouts documented in the ATM Forum's UNI 3.0 Specification. -- decQ2931TimerTable OBJECT-TYPE SYNTAX SEQUENCE OF DecQ2931TimerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Allows network managers to examine and configure the timers used for Q.2931 call processing." ::= { decQ2931Group 3 } decQ2931TimerEntry OBJECT-TYPE SYNTAX DecQ2931TimerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains timers for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType = 'aal5'). Sorry about the cryptic timer names, but that's what the ATM Forum calls these timers in the UNI V3.0 Specification." INDEX { ifIndex, decAtmSignallingIndex } ::= { decQ2931TimerTable 1 } DecQ2931TimerEntry ::= SEQUENCE { t303 INTEGER, t308 INTEGER, t309 INTEGER, t310 INTEGER, t313 INTEGER, t316 INTEGER, t317 INTEGER, t322 INTEGER, t398 INTEGER, t399 INTEGER } t303 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SETUP message timeout, in seconds." DEFVAL { 4 } ::= { decQ2931TimerEntry 1 } t308 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RELEASE message timeout, in seconds." DEFVAL { 30 } ::= { decQ2931TimerEntry 2 } t309 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SAAL disconnection timeout, in seconds." DEFVAL { 90 } ::= { decQ2931TimerEntry 3 } t310 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CALL PROCEEDING timeout, in seconds." DEFVAL { 10 } ::= { decQ2931TimerEntry 4 } t313 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "CONNECT timeout, in seconds. This timer is only used on the User side of a UNI." DEFVAL { 4 } ::= { decQ2931TimerEntry 5 } t316 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RESTART timeout, in seconds." DEFVAL { 120 } ::= { decQ2931TimerEntry 6 } t317 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "RESTART reply timeout, in seconds. This should be less than the value for timer 't316'." ::= { decQ2931TimerEntry 7 } t322 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "STATUS ENQUIRY timeout, in seconds." DEFVAL { 4 } ::= { decQ2931TimerEntry 8 } t398 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "DROP PARTY timeout, in seconds." DEFVAL { 4 } ::= { decQ2931TimerEntry 9 } t399 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ADD PARTY timeout, in seconds." DEFVAL { 14 } ::= { decQ2931TimerEntry 10 } -- =========================================================================== -- ==================== T h e Q S A A L G r o u p ====================== -- =========================================================================== decQSaalGroup OBJECT IDENTIFIER ::= { decAtmSignallingMIBObjects 3 } -- -- This table is mandatory. -- decQSaalMsgTable OBJECT-TYPE SYNTAX SEQUENCE OF DecQSaalMsgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { decQSaalGroup 1 } decQSaalMsgEntry OBJECT-TYPE SYNTAX DecQSaalMsgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains signalling statistics for one UNI / NNI. Note that the table is indexed by ATM ports (ifType = 'atm') as opposed to AAL5 entities (ifType = 'aal5')." INDEX { ifIndex, decAtmSignallingIndex } ::= { decQSaalMsgTable 1 } DecQSaalMsgEntry ::= SEQUENCE { txDiscardedSdus Counter, rxErrorPdus Counter, txErrorPdus Counter, rxDiscardedPdus Counter, txDiscardedPdus Counter, bgnTx Counter, bgnRx Counter, bgakTx Counter, bgakRx Counter, endTx Counter, endRx Counter, endakTx Counter, endakRx Counter, rsTx Counter, rsRx Counter, rsakTx Counter, rsakRx Counter, bgrejTx Counter, bgrejRx Counter, sdTx Counter, sdRx Counter, sdpTx Counter, sdpRx Counter, erTx Counter, erRx Counter, pollTx Counter, pollRx Counter, statTx Counter, statRx Counter, ustatTx Counter, ustatRx Counter, udTx Counter, udRx Counter, mdTx Counter, mdRx Counter, erakTx Counter, erakRx Counter } txDiscardedSdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing SDUs which were discarded." ::= { decQSaalMsgEntry 1 } rxErrorPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming PDUs which could not be received due to errors." ::= { decQSaalMsgEntry 2 } txErrorPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of transmission errors for outgoing PDUs." ::= { decQSaalMsgEntry 3 } rxDiscardedPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming PDUs which were discarded." ::= { decQSaalMsgEntry 4 } txDiscardedPdus OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing PDUs which were discarded." ::= { decQSaalMsgEntry 5 } bgnTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGN (Request Initialization) messages transmitted over the interface." ::= { decQSaalMsgEntry 6 } bgnRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGN (Request Initialization) messages received over the interface." ::= { decQSaalMsgEntry 7 } bgakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGAK (Request Acknowledgement) messages transmitted over the interface." ::= { decQSaalMsgEntry 8 } bgakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGAK (Request Acknowledgement) messages received over the interface." ::= { decQSaalMsgEntry 9 } endTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of END (Disconnect Command) messages transmitted over the interface." ::= { decQSaalMsgEntry 10 } endRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of END (Disconnect Command) messages received over the interface." ::= { decQSaalMsgEntry 11 } endakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ENDAK (Disconnect Acknowledgement) messages transmitted over the interface." ::= { decQSaalMsgEntry 12 } endakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ENDAK (Disconnect Acknowledgement) messages received over the interface." ::= { decQSaalMsgEntry 13 } rsTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RS (Resynchronization Command) messages transmitted over the interface." ::= { decQSaalMsgEntry 14 } rsRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RS (Resynchronization Command) messages received over the interface." ::= { decQSaalMsgEntry 15 } rsakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RSAK (Resynchronization Acknowledgement) messages transmitted over the interface." ::= { decQSaalMsgEntry 16 } rsakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of RSAK (Resynchronization Acknowledgement) messages received over the interface." ::= { decQSaalMsgEntry 17 } bgrejTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGREJ (Connection Reject) messages transmitted over the interface." ::= { decQSaalMsgEntry 18 } bgrejRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of BGREJ (Connection Reject) messages received over the interface." ::= { decQSaalMsgEntry 19 } sdTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SD (Sequenced Connection-Mode Data) messages transmitted over the interface." ::= { decQSaalMsgEntry 20 } sdRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SD (Sequenced Connection-Mode Data) messages received over the interface." ::= { decQSaalMsgEntry 21 } sdpTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SDP (Sequenced Connection-Mode Data with request for Receive State Information) messages transmitted over the interface. This object only applies to UNI 3.0." ::= { decQSaalMsgEntry 22 } sdpRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of SDP (Sequenced Connection-Mode Data with request for Receive State Information) messages received over the interface. This object only applies to UNI 3.0." ::= { decQSaalMsgEntry 23 } erTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ER (Recovery Command) messages transmitted over the interface. This object is not applicable to UNI 3.0." ::= { decQSaalMsgEntry 24 } erRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ER (Recovery Command) messages received over the interface. This object is not applicable to UNI 3.0." ::= { decQSaalMsgEntry 25 } pollTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of POLL (Transmitter State Information with request for Receive State Information) messages transmitted over the interface." ::= { decQSaalMsgEntry 26 } pollRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of POLL (Transmitter State Information with request for Receive State Information) messages received over the interface." ::= { decQSaalMsgEntry 27 } statTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of STAT (Solicited Receiver State Information) messages transmitted over the interface." ::= { decQSaalMsgEntry 28 } statRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of STAT (Solicited Receiver State Information) messages received over the interface." ::= { decQSaalMsgEntry 29 } ustatTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of USTAT (Unsolicited Receiver State Info) messages transmitted over the interface." ::= { decQSaalMsgEntry 30 } ustatRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of USTAT (Unsolicited Receiver State Info) messages received over the interface." ::= { decQSaalMsgEntry 31 } udTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of UD (Unnumbered User Data) messages transmitted over the interface." ::= { decQSaalMsgEntry 32 } udRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of UD (Unnumbered User Data) messages received over the interface." ::= { decQSaalMsgEntry 33 } mdTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MD (Unnumbered Management Data) messages transmitted over the interface." ::= { decQSaalMsgEntry 34 } mdRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of MD (Unnumbered Management Data) messages received over the interface." ::= { decQSaalMsgEntry 35 } erakTx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ERAK (Recovery Acknowledgement) messages transmitted over the interface. This object is not applicable to UNI 3.0." ::= { decQSaalMsgEntry 36 } erakRx OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of ERAK (Recovery Acknowledgement) messages received over the interface. This object is not applicable to UNI 3.0." ::= { decQSaalMsgEntry 37 } END