-- ***************************************************************************** -- DGS-3120-48TC-L3MGMT-MIB -- ***************************************************************************** -- Version 0.05 -- 2013/10/31 Dinah Zhou -- Description: -- [New Object] -- 1. Add swL3IpStaticRouteWeight and swL3IpStaticRouteInterfaceName objects. -- -- Version 0.04 -- 2012/11/16 Kaiser Yang -- Description: -- [Modification] -- 1. Modify the syntax of node swL3IpStaticRouteStatus. -- -- Version 0.03 -- 2011/1/19 Sammy Xiao -- Description: -- [New Object] -- 1. Add swL3IpCtrlDhcpv6ClientState and swL3Ipv6AddressCtrlAddressType objects. -- -- Version 0.02, 2010/04/06, Easion Tang -- Description: -- [Modification] -- Delete swL3RelayMgmt nodes, it's not supported by DGS-3120. -- Version 0.01 -- 2010/1/25 -- Built by Kevin Wang. -- ***************************************************************************** DGS-3120-48TC-L3MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32,MODULE-IDENTITY,OBJECT-TYPE,IpAddress, NOTIFICATION-TYPE, Integer32,Unsigned32 FROM SNMPv2-SMI PhysAddress,TruthValue,DisplayString,RowStatus FROM SNMPv2-TC Ipv6Address FROM IPV6-TC dlink-Dgs3120Proj-Dgs3120-48TC FROM SWDGS3120PRIMGMT-MIB; swL3MgmtMIB MODULE-IDENTITY LAST-UPDATED "1211160000Z" ORGANIZATION " " CONTACT-INFO " " DESCRIPTION "The Structure of Layer 3 Network Management Information for the proprietary enterprise." ::= { dlink-Dgs3120Proj-Dgs3120-48TC 3 } NodeAddress ::= OCTET STRING (SIZE(6)) NetAddress ::= OCTET STRING (SIZE(4)) -- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } swL3IpMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 2 } -- swL3RelayMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 3 } -- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } -- swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 } -- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 3 } -- **************************************************************************** -- Textual Conventions -- **************************************************************************** -- ******************************************************************** -- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } -- ******************************************************************** -- swL3DevCtrl OBJECT IDENTIFIER ::= { swL3DevMgmt 1 } -- swL3DevCtrlRIPState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the Routing Information Protocol (RIP) -- version 2 function is enabled or disabled." -- ::= { swL3DevCtrl 1 } -- swL3DevCtrlOSPFState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates OSPF protocol is enabled or disabled." -- ::= { swL3DevCtrl 2 } -- swL3DevCtrlDVMRPState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the DVMRP protocol is enabled or disabled." -- ::= { swL3DevCtrl 3 } -- swL3DevCtrlPIMDMState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the PIM-DM protocol is enabled or disabled." -- ::= { swL3DevCtrl 4 } -- swL3DevCtrlVRRPState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates VRRP protocol is enabled or disabled." -- ::= { swL3DevCtrl 5 } -- ******************************************************************** -- swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } -- ******************************************************************** -- swL3IpCtrlIpv4State OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the IPv4 function state of the device." -- ::= { swL3IpCtrlMgmt 1 } -- swL3IpCtrlIpv6State OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the IPv6 function state of the device." -- ::= { swL3IpCtrlMgmt 2 } swL3IpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain IP interface information." ::= { swL3IpCtrlMgmt 3 } swL3IpCtrlEntry OBJECT-TYPE SYNTAX SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IP interface." INDEX { swL3IpCtrlInterfaceName } ::= { swL3IpCtrlTable 1 } SwL3IpCtrlEntry ::= SEQUENCE { swL3IpCtrlInterfaceName DisplayString, swL3IpCtrlIfIndex INTEGER, swL3IpCtrlIpAddr IpAddress, swL3IpCtrlIpSubnetMask IpAddress, swL3IpCtrlVlanName DisplayString, swL3IpCtrlProxyArp INTEGER, swL3IpCtrlSecondary TruthValue, swL3IpCtrlMode INTEGER, swL3IpCtrlAdminState INTEGER, swL3IpCtrlIpv4AdminState INTEGER, -- swL3IpCtrlIpv4OperState -- INTEGER, swL3IpCtrlIpv6AdminState INTEGER, -- swL3IpCtrlIpv6OperState -- INTEGER, swL3IpCtrlIpv6LinkLocalAddress Ipv6Address, swL3IpCtrlIpv6LinkLocalPrefixLen INTEGER, swL3IpCtrlState RowStatus, swL3IpCtrlIpv6LinkLocalAutoState INTEGER, swL3IpCtrlLocalProxyArp INTEGER, swL3IpCtrlDhcpv6ClientState INTEGER , swL3IpCtrlIpDhcpOption12State INTEGER, swL3IpCtrlIpDhcpOption12HostName DisplayString } swL3IpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3IpCtrlEntry 1 } swL3IpCtrlIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the IP interface number in the swL3IpCtrlTable." ::= { swL3IpCtrlEntry 2 } swL3IpCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the interface. This object only can take the value of the unicast IP address." ::= { swL3IpCtrlEntry 3 } swL3IpCtrlIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP net mask for this interface." ::= { swL3IpCtrlEntry 4 } swL3IpCtrlVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table." ::= { swL3IpCtrlEntry 5 } swL3IpCtrlProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates enable/disable of the proxy ARP function for IPv4." ::= { swL3IpCtrlEntry 6 } swL3IpCtrlSecondary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP." ::= { swL3IpCtrlEntry 7 } swL3IpCtrlMode OBJECT-TYPE SYNTAX INTEGER { other(1), bootp(3), dhcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server." ::= { swL3IpCtrlEntry 8 } swL3IpCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IP interface." ::= { swL3IpCtrlEntry 9 } swL3IpCtrlIpv4AdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled." ::= { swL3IpCtrlEntry 10 } -- swL3IpCtrlIpv4OperState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current IPv4 operational state of the IP interface. -- If the swL3IpCtrlIpv4State is disabled, disabled(2) will be displayed. -- Otherwise, it will be set as other(1)." -- ::= { swL3IpCtrlEntry 11 } swL3IpCtrlIpv6AdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled." ::= { swL3IpCtrlEntry 12 } -- swL3IpCtrlIpv6OperState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The current IPv6 operational state of the IP interface. -- If the swL3IpCtrlIpv6State is disabled, disabled(2) will be displayed. -- Otherwise, it will be set as other(1)." -- ::= { swL3IpCtrlEntry 13 } swL3IpCtrlIpv6LinkLocalAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 link local address for this interface." ::= { swL3IpCtrlEntry 14 } swL3IpCtrlIpv6LinkLocalPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix length for this IPv6 link local address." ::= { swL3IpCtrlEntry 15 } swL3IpCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3IpCtrlEntry 16 } swL3IpCtrlIpv6LinkLocalAutoState OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the IPv6 link local auto." ::= { swL3IpCtrlEntry 17 } swL3IpCtrlLocalProxyArp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates enable/disable of the local proxy ARP function for IPv4." ::= { swL3IpCtrlEntry 18 } swL3IpCtrlDhcpv6ClientState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the Dhcpv6 Client." ::= { swL3IpCtrlEntry 20 } swL3IpCtrlIpDhcpOption12State OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message." ::= { swL3IpCtrlEntry 22 } swL3IpCtrlIpDhcpOption12HostName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..63)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12." ::= { swL3IpCtrlEntry 23} swL3Ipv6CtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6CtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains IPv6 information of an IP interface." ::= { swL3IpCtrlMgmt 4 } swL3Ipv6CtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6CtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IPv6 information about a specific IP interface." INDEX { swL3Ipv6CtrlInterfaceName } ::= { swL3Ipv6CtrlTable 1 } SwL3Ipv6CtrlEntry ::= SEQUENCE { swL3Ipv6CtrlInterfaceName DisplayString, swL3Ipv6CtrlMaxReassmblySize INTEGER, swL3Ipv6CtrlNsRetransTimer Unsigned32 -- swL3Ipv6CtrlRsState -- INTEGER, -- swL3Ipv6CtrlRaState -- INTEGER, -- swL3Ipv6CtrlRaMinRtrAdvInterval -- INTEGER, -- swL3Ipv6CtrlRaMaxRtrAdvInterval -- INTEGER, -- swL3Ipv6CtrlRaLifeTime -- INTEGER, -- swL3Ipv6CtrlRaReachableTime -- INTEGER, -- swL3Ipv6CtrlRaRetransTime -- Unsigned32, -- swL3Ipv6CtrlRaHopLimit -- INTEGER, -- swL3Ipv6CtrlRaManagedFlag -- INTEGER, -- swL3Ipv6CtrlRaOtherConfigFlag -- INTEGER } swL3Ipv6CtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3Ipv6CtrlEntry 1 } swL3Ipv6CtrlMaxReassmblySize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Reassembly Size of the IP interface." ::= { swL3Ipv6CtrlEntry 2 } swL3Ipv6CtrlNsRetransTimer OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "Neighbor solicitation's retransmit timer. The unit is set in milliseconds." ::= { swL3Ipv6CtrlEntry 3 } -- swL3Ipv6CtrlRsState OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Router solicited state." -- ::= { swL3Ipv6CtrlEntry 4 } -- -- swL3Ipv6CtrlRaState OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Neighbor solicited state." -- ::= { swL3Ipv6CtrlEntry 5 } -- -- swL3Ipv6CtrlRaMinRtrAdvInterval OBJECT-TYPE -- SYNTAX INTEGER (3..1350) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The minimum time allowed between sending unsolicited multicast Router -- Advertisements from the interface. The unit is set in seconds. -- It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. -- Default value: 0.33 * MaxRtrAdvInterval" -- ::= { swL3Ipv6CtrlEntry 6 } -- -- swL3Ipv6CtrlRaMaxRtrAdvInterval OBJECT-TYPE -- SYNTAX INTEGER (4..1800) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The maximum time allowed between sending unsolicited multicast Router -- Advertisements from the interface. The unit is set in seconds." -- DEFVAL {600} -- ::= { swL3Ipv6CtrlEntry 7 } -- -- swL3Ipv6CtrlRaLifeTime OBJECT-TYPE -- SYNTAX INTEGER (0..9000) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the lifetime of the router as the default router." -- ::= { swL3Ipv6CtrlEntry 8 } -- -- swL3Ipv6CtrlRaReachableTime OBJECT-TYPE -- SYNTAX INTEGER (0..3600000) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the amount of time that a node can consider a neighboring -- node reachable after receiving a reachability confirmation." -- ::= { swL3Ipv6CtrlEntry 9 } -- -- swL3Ipv6CtrlRaRetransTime OBJECT-TYPE -- SYNTAX Unsigned32 (0..4294967295) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the amount of time between retransmissions of neighbor -- solicited messages. -- The unit is set in millisecond." -- ::= { swL3Ipv6CtrlEntry 10 } -- -- swL3Ipv6CtrlRaHopLimit OBJECT-TYPE -- SYNTAX INTEGER (0..255) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the default value of the hop limit field in the IPv6 header for -- packets sent by hosts that receive this RA message." -- ::= { swL3Ipv6CtrlEntry 11 } -- -- swL3Ipv6CtrlRaManagedFlag OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "When enabled, it indicates that hosts receiving this RA must use a -- stateful address configuration protocol to obtain an address in the addition -- to the addresses derived from the stateless address configuration." -- ::= { swL3Ipv6CtrlEntry 12 } -- -- swL3Ipv6CtrlRaOtherConfigFlag OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "When enabled, it indicates that hosts receiving this RA must use a stateful -- address configuration protocol to obtain an on-link address configuration information." -- ::= { swL3Ipv6CtrlEntry 13 } swL3Ipv6AddressCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Ipv6AddressCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contain IPv6 address information for each IP interface." ::= { swL3IpCtrlMgmt 5 } swL3Ipv6AddressCtrlEntry OBJECT-TYPE SYNTAX SwL3Ipv6AddressCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IPv6 address." INDEX { swL3Ipv6AddressCtrlInterfaceName, swL3Ipv6Address, swL3Ipv6AddressCtrlPrefixLen } ::= { swL3Ipv6AddressCtrlTable 1 } SwL3Ipv6AddressCtrlEntry ::= SEQUENCE { swL3Ipv6AddressCtrlInterfaceName DisplayString, swL3Ipv6Address Ipv6Address, swL3Ipv6AddressCtrlPrefixLen INTEGER, -- swL3Ipv6AddressCtrlPreferredLifeTime -- Unsigned32, -- swL3Ipv6AddressCtrlValidLifeTime -- Unsigned32, -- swL3Ipv6AddressCtrlOnLinkFlag -- INTEGER, -- swL3Ipv6AddressCtrlAutonomousFlag -- INTEGER, swL3Ipv6AddressCtrlState RowStatus, swL3Ipv6AddressCtrlAddressType INTEGER } swL3Ipv6AddressCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the name of the IP interface. " ::= { swL3Ipv6AddressCtrlEntry 1 } swL3Ipv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the IPv6 address." ::= { swL3Ipv6AddressCtrlEntry 2 } swL3Ipv6AddressCtrlPrefixLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the prefix length of this IPv6 address." ::= { swL3Ipv6AddressCtrlEntry 3 } -- swL3Ipv6AddressCtrlPreferredLifeTime OBJECT-TYPE -- SYNTAX Unsigned32 (0..4294967294) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the number of seconds that an address, based on the specified prefix, -- using the stateless address configuration, remains in preferred state. -- For an infinite valid lifetime, the value can be set to 0xffffffff." -- ::= { swL3Ipv6AddressCtrlEntry 4 } -- -- swL3Ipv6AddressCtrlValidLifeTime OBJECT-TYPE -- SYNTAX Unsigned32 (0..4294967294) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the number of seconds that an address, based on the specified prefix, -- using the stateless address configuration, remains valid. -- For an infinite valid lifetime, the value can be set to 0xffffffff." -- ::= { swL3Ipv6AddressCtrlEntry 5 } -- -- swL3Ipv6AddressCtrlOnLinkFlag OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "When enabled, the address implied by the specified prefix is available -- on the link where the RA message is received." -- ::= { swL3Ipv6AddressCtrlEntry 6 } -- -- swL3Ipv6AddressCtrlAutonomousFlag OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "When enabled, the specified prefix will be used to create an autonomous address configuration." -- ::= { swL3Ipv6AddressCtrlEntry 7 } -- swL3Ipv6AddressCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3Ipv6AddressCtrlEntry 8 } swL3Ipv6AddressCtrlAddressType OBJECT-TYPE SYNTAX INTEGER { manual(1), dhcpv6(2), stateless(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement." ::= { swL3Ipv6AddressCtrlEntry 9 } swL3IpCtrlAllIpIfState OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates all interface function state of the device." ::= { swL3IpCtrlMgmt 7 } -- ******************************************************************** -- swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- ******************************************************************** swL3IpFdbInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets." ::= { swL3IpFdbMgmt 1 } swL3IpFdbInfoEntry OBJECT-TYPE SYNTAX SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific IP address for which the bridge has some forwarding and/or filtering information." INDEX { swL3IpFdbInfoIpAddr } ::= { swL3IpFdbInfoTable 1 } SwL3IpFdbInfoEntry ::= SEQUENCE { -- swL3IpFdbInfoRdIndex -- INTEGER, swL3IpFdbInfoIpAddr IpAddress, swL3IpFdbInfoIpSubnetMask IpAddress, swL3IpFdbInfoPort INTEGER, swL3IpFdbInfoType INTEGER } -- swL3IpFdbInfoRdIndex OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The object indicates the IP routing domain index, and should -- be associated with one of swL3IpDomainStatsIndex." -- ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A IP address for which switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "A IP net mask for this interface for which the switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 2 } swL3IpFdbInfoPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Either the value '0', or the port number of the port on which packets having an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address." ::= { swL3IpFdbInfoEntry 3 } swL3IpFdbInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), dynamic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry." ::= { swL3IpFdbInfoEntry 4 } -- ******************************************************************** -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } -- ******************************************************************** -- swL3IpFilterAddrConfig OBJECT IDENTIFIER ::= { swL3IpFilterMgmt 1 } -- swL3IpFilterAddrMaxSupportedEntries OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Maximum number of entries in the IP address filtering table -- (swL3IpFilterAddrCtrlTable) ." -- ::= { swL3IpFilterAddrConfig 1 } -- swL3IpFilterAddrCurrentTotalEntries OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current applied number of entries in the IP address filtering -- table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it -- means there are two entries in swL3IpFilterAddrCtrlTable." -- ::= { swL3IpFilterAddrConfig 2 } -- swL3IpFilterAddrCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL3IpFilterAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table defines the information for the device to filter packets -- with specific IP addresses (either as the DA and/or as the SA). -- The IP address can be either a unicast address or a multicast address. -- This table has a higher priority then both the static FDB table and -- the IGMP table. It means that if an IP address appears in this table -- it will also appear on the static FDB table, the device will use the -- information provided in this table to process the packet." -- ::= { swL3IpFilterAddrConfig 3 } -- swL3IpFilterAddrCtrlEntry OBJECT-TYPE -- SYNTAX SwL3IpFilterAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information about a specific unicast/multicast IP -- address for which the switch has filtering information." -- INDEX { swL3IpFilterAddrIpAddr } -- ::= { swL3IpFilterAddrCtrlTable 1 } -- SwL3IpFilterAddrCtrlEntry ::= -- SEQUENCE { -- swL3IpFilterAddrIpAddr -- IpAddress, -- swL3IpFilterAddrIpSktGE -- INTEGER, -- swL3IpFilterAddrIpSktLE -- INTEGER, -- swL3IpFilterAddrCtrlState -- INTEGER -- } -- swL3IpFilterAddrIpAddr OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates a unicast/multicast IP address for which -- the switch has filtering information. But if the -- swL3IpFilterAddrCtrlState = src-addr, then the object can not be -- a multicast IP address (Class D IP address)." -- ::= { swL3IpFilterAddrCtrlEntry 1 } -- swL3IpFilterAddrIpSktGE OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates a socket number which should be greater than -- or equal to the used socket number" -- ::= { swL3IpFilterAddrCtrlEntry 2 } -- swL3IpFilterAddrIpSktLE OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates a socket number which should be less than -- or equal to the used socket number" -- ::= { swL3IpFilterAddrCtrlEntry 3 } -- swL3IpFilterAddrCtrlState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- dst-addr(2), -- src-addr(3), -- dst-src-addr(4), -- invalid(5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- other (1) - This entry is currently in use but the conditions -- under which it will remain so are different from each of the -- following values. -- dst-addr (2) - Received frames's destination addresses are -- currently filtered when they match with an IP -- address entry of the table. -- src-addr (3) - Received frames's source addresses are currently -- filtered when they match with an IP address entry of -- the table. -- dst-src-addr (4) - Received frames's destination addresses or -- source addresses are currently filtered when they match -- with the IP address of an entry on the table. -- invalid (5) ¡V If this value is written to the object, the -- corresponding entry will be removed from the table." -- ::= { swL3IpFilterAddrCtrlEntry 2 } -- ******************************************************************** -- swL3IpArpAgingTime OBJECT IDENTIFIER ::= { swL3IpMgmt 4 } -- ******************************************************************** swL3IpArpAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period in minutes for aging out dynamically learned arp information." ::= { swL3IpMgmt 4 } -- ******************************************************************** -- swL3IpStaticRouteTable OBJECT IDENTIFIER ::= { swL3IpMgmt 5 } -- ******************************************************************** swL3IpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP static Routing table." ::= { swL3IpMgmt 5 } swL3IpStaticRouteEntry OBJECT-TYPE SYNTAX SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action." INDEX { swL3IpStaticRouteDest, swL3IpStaticRouteMask, swL3IpStaticRouteNextHop } ::= { swL3IpStaticRouteTable 1 } SwL3IpStaticRouteEntry ::= SEQUENCE { swL3IpStaticRouteDest IpAddress, swL3IpStaticRouteMask IpAddress, swL3IpStaticRouteBkupState INTEGER, swL3IpStaticRouteNextHop IpAddress, swL3IpStaticRouteMetric INTEGER, swL3IpStaticRouteStatus INTEGER, swL3IpStaticRouteWeight INTEGER, swL3IpStaticRouteInterfaceName DisplayString } swL3IpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x." ::= { swL3IpStaticRouteEntry 1 } swL3IpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest." ::= { swL3IpStaticRouteEntry 2 } swL3IpStaticRouteBkupState OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2), none(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The routing state for this route.The value SHOULD be primary(1) or backup(2)." ::= { swL3IpStaticRouteEntry 3 } swL3IpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0." ::= { swL3IpStaticRouteEntry 4 } swL3IpStaticRouteMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The routing metric for this route." ::= { swL3IpStaticRouteEntry 5 } swL3IpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3), active(4), inActive(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table." ::= { swL3IpStaticRouteEntry 6 } swL3IpStaticRouteWeight OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the weight value. Used for the weighted multipath." ::= { swL3IpStaticRouteEntry 7 } swL3IpStaticRouteInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the name of the IP interface." ::={ swL3IpStaticRouteEntry 8} -- ******************************************************************** -- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 3 } -- ******************************************************************** -- -- swL3RelayDnsState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates DNS Relay function is enabled or -- disabled." -- ::= { swL3RelayDnsMgmt 1 } -- -- swL3RelayDnsPrimaryServer OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the address of the primary DNS server." -- ::= { swL3RelayDnsMgmt 2 } -- -- swL3RelayDnsSecondaryServer OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the address of the secondary DNS server." -- ::= { swL3RelayDnsMgmt 3 } -- -- swL3RelayDnsCacheState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates DNS Relay cache is enabled or -- disabled." -- ::= { swL3RelayDnsMgmt 4 } -- -- swL3RelayDnsStaticTableState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates DNS Relay static table is enabled or -- disabled." -- ::= { swL3RelayDnsMgmt 5 } -- -- swL3RelayDnsCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL3RelayDnsCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table display the current DNS relay static table." -- ::= { swL3RelayDnsMgmt 6 } -- -- swL3RelayDnsCtrlEntry OBJECT-TYPE -- SYNTAX SwL3RelayDnsCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information display the current DNS relay static -- table." -- INDEX { swL3RelayDnsCtrlDomainName, swL3RelayDnsCtrlIpAddr} -- ::= { swL3RelayDnsCtrlTable 1 } -- -- SwL3RelayDnsCtrlEntry ::= -- SEQUENCE { -- swL3RelayDnsCtrlDomainName -- DisplayString, -- swL3RelayDnsCtrlIpAddr -- IpAddress, -- swL3RelayDnsCtrlState -- INTEGER -- } -- -- swL3RelayDnsCtrlDomainName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(1..32)) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The domain name of the entry." -- ::= { swL3RelayDnsCtrlEntry 1 } -- -- swL3RelayDnsCtrlIpAddr OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The IP address of the entry." -- ::= { swL3RelayDnsCtrlEntry 2 } -- -- swL3RelayDnsCtrlState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- invalid(2), -- valid(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- invalid(2) - writing this value to the object, and then the -- corresponding entry will be removed from the table. -- valid(3) - this entry is reside in the table." -- ::= { swL3RelayDnsCtrlEntry 3 } -- -- -- ******************************************************************** -- swL3Md5Table OBJECT IDENTIFIER ::= { swL3MgmtMIB 4 } -- ******************************************************************** -- ******************************************************************** -- swL3RouteRedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 5 } -- ******************************************************************** -- ******************************************************************** -- swL3OspfHostTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 6 } -- ******************************************************************** -- ******************************************************************** -- swL3ospfVirtIfTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 7 } -- ******************************************************************** -- ******************************************************************* -- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } -- ******************************************************************* END